How To Refurbish A Clawfoot Tub

Richard Trethewey visits the. How to Refinish Your Clawfoot Tub Materials needed.

Clawfoot Tub Refinishing And Restoration In Ma New Look Refinishing

Sand your tub smooth with 400 grit sandpaper 4.

How to refurbish a clawfoot tub. With that being said refinishing a tub is basically a painting project so mask off all the edges and protect everything you dont want painted with a drop cloth. Step 6 - Taking Away the Old Putty. After that one option is to have the rough exterior filled and sanded to be smooth and glossy.

So in this series Ill be going over how I restored my 4ft claw foot tub made in 1930. If not skip to step three. This plate is attached with screws or nuts.

How to refurbish an old clawfoot bathtub doityourself how to refinish an antique claw foot tub check out my new how to reglaze a clawfoot tub tos diy clawfoot bathtub refinishing cast iron tub miracle clawfoot bathtub refinishing hints oh dennis i have a project how to re an old clawfoot tub interior and exterior. If it has minor rust holes cracks chips or dents they are. If previously sprayed peel up what you can of the old finish.

Evaluate the shape or condition that the bathtub is in. Using the Rustoleum etching cream epoxy finish. The antique claw foot tub that Newton homeowners Liz and Joe found at the salvage yard needs to be cleaned up before installing.

How to RECAST a clawfoot tub. Httpbitly22LGXK7Brock demonstrates how he restores his old claw-foot bath tub. Before applying primer I wiped the tub down really well first with a dry rag and then with a wet rag and finally with a dry rag again.

Subscribe to our channel. Remove any old plumbing fixtures. Step 4 - Removing the Overflow Pipe.

Follow instructions on the paint can for drying time and then repeat step 2. The overflow plate inside the tub is attached to the pipes on the back of the clawfoot bath tub. Coarse grit sandpaper I used 60 grit palm sander weve used this one for 7 years now without issues wire brush.

How to Refinish a Claw-Foot Tub This Old House. The owner can refinish the outside of a clawfoot tub but the inside needs to be done with a good product for your skin and with a good technique by professional In other words you dont want brush or roller marks showing on the inside of the tub at the end of all this drama. Because the best way to restore clawfoot tub is to send it out to a company that does that.

This is a vintage tub before refinishing. This Old House plumbing and heating expert Richard Trethewey shows how to save an old but elegant cast-iron bathtubSUBSCRIBE to This Old House. Then repair all nicks and holes with the appropriate filler and sand the areas smooth.

For cast iron tub refinishing the first step is to have the exterior sand blasted to remove old paint rust and corrosion. Because if you do it in the house itself they can come in with acids and they can etch the old finish and they can add a new finish and then they can bring in heat lights and bake it on. Now remove the tub from the crate and place it rim down on the blanket.

How to Refinish a Claw-Foot Tub. Jan 22 2018 How to Refinish Your Clawfoot Tub 1. Plastic or fabric drop cloths to protect work area metal primer I used Rustoleums Rusty Metal Primer.

I show you the various ways you can remove the surface rust from the t. Shake well and spray evenly to cover the entire surface. Use a screwdriver to safely remove it.

Sand the exterior of the tub. The exterior of most clawfoot bathtubs is rough exposed cast iron. It needs to be removed with a wrench.

A tee is used to connect an elbow to the rest of the drain.

How To Refinish A Nasty Old Clawfoot Tub